aluminum strip

The raw materials of aluminum strips are pure aluminium or aluminium alloy, cast-rolled aluminium coil and hot-rolled aluminium coil, which are rolled into thin sheet aluminium coil with different thickness and width by cold rolling mill, and then sliced into different width aluminium strip by longitudinal shearing mill according to the use.

The main processing equipment of aluminum strip is the split unit, which can be divided into required length and width according to needs. Of course, the strip processing equipment is universal, can also be processed on copper coil, the product is called copper aluminum strip.

Aluminum strip is a deep processed aluminum product formed by aluminum coil cutting. It is an important raw material in industry.

According to the alloy elements contained in the aluminum strip, the aluminum strip and aluminum plate are also divided into 8 series. However, the current series are 1000 3000 5000 and 8000 series.

According to the annealing state of aluminum strip, aluminum strip can be divided into soft (o state) semi-hard (H24) hard (h18). At present, the most commonly used should belong to the whole soft series, because the O state is easier to stretch and bend.

The alloy grades commonly used for aluminium strip are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc. Commonly used states are O States and H states. O indicates soft state, H means hard. After O and H, you can use numbers to indicate the degree of hardness and the degree of annealing.

The main uses of aluminum strip stock are: transformer aluminum strip (transformer aluminum foil), high frequency welding aluminum strip , aluminum led strip,fin radiator aluminum strip, cable aluminum strip, stamping aluminum strip, aluminum strip for aluminum edge, etc.

Original source: https://www.aluminumstrip24.com/news/processing-technology-and-classification-of-aluminum-strip.html

Tags: aluminum strip,  

Previous： aluminum srip cut to size

Next： aluminium strip