aluminum srip cut to size

In the modern industrial automation today, aluminum strip cut to size cutting processing has also entered the automation sequence, the use of large-scale longitudinal shear cutting machine control, set strict program parameters, for aluminum strip cutting batch production is also easy, its put into use to ensure the production speed and technological level.

In the production of thin aluminum strip (thickness 0.2-0.3 mm), the requirement of aluminum plate shape is high. Lotus edge defect which is easy to produce is eliminated in the slitting process of longitudinal shear. (Lotus leaf edge is the aluminum strip in the shearing process and the blade, rubber ring, flattening roller contact between improper, so that the edge of the aluminum strip formed a lotus leaf-like narrow strip wave).
Every time the edge defect of lotus leaf occurs in the production of aluminum strip longitudinal shear, the cutter or flattening roll should be readjusted, and the eyelid should be pulled again to check the shape of the strip. This not only affects the production efficiency, but also reduces the yield. Once the edge roll of lotus leaf appears, it can not be used as a qualified product.
Therefore, all kinds of surface quality problems occurred in the longitudinal shear cutting process of aluminum strip are solved one by one, which ensures that the surface of the finished aluminum strip is smooth and has no burr.

Original source: https://www.aluminumstrip24.com/news/1mm-3mm-5mm-10mm-aluminum-srip-cut-to-size.html

Tags: flexible aluminum strips,  

Previous: aluminum strip

Next: aluminum strip