aluminum strip edging

Aluminum strip edging is a deep processed aluminum product formed by aluminum coil cutting. It is an important raw material in industry.
According to the alloy elements contained in the aluminum power strip, the aluminum strip and aluminum plate are also divided into 8 series. However, the current series are 1000 3000 5000 and 8000 series.
According to the different annealing state of the aluminum power strip, the aluminium strip can be divided into full soft (o) semi-hard (H24) full hard (h18). At present, the most commonly used should belong to the whole soft series, because the O state is easier to stretch and bend.

1060 aluminum strip requires high corrosion resistance and formability, but it does not require high strength, chemical equipment is its typical use.
1100 aluminum strip for processing needs good formability and high corrosion resistance, but does not require high strength parts and components, such as chemical products, food industrial devices and storage containers, sheet processing parts, deep drawing or spinning concave utensils, welding parts, heat exchangers, printed boards, nameplates, reflective appliances.
3004 aluminum strip plate/ thick plate/stretching tube. As long as extruded pipe is used in all-aluminium can body, it requires higher parts than 3003 alloy, chemical products production and storage devices, thin plate processing parts, building baffles, cable pipes, sewers, various lamps and lanterns parts.
3003 plate. Strip. Foil. Thick plate, stretch tube. Extruding tube. Type. Stick. Wire rod. Cold-processed bars, cold-processed wires, rivet wires, forgings, foils and heat sinks are mainly used for processing parts that require good formability, high corrosion resistance, or good solderability, or workpieces that require higher strength than 1*** series alloys, such as tanks and tanks for transporting liquids, pressure tanks. Storage device, heat exchanger, chemical equipment, aircraft fuel tank, oil duct, reflector, kitchen equipment, washing machine cylinder block, rivets, welding wire.
5052 aluminum alloy has good formability, corrosion resistance, candleability, fatigue strength and medium static strength. It can be used to manufacture aircraft fuel tank, fuel pipe, sheet metal parts of traffic vehicles and ships, meters, street lamp brackets and rivets, hardware products, etc.
The main processing equipment of aluminium fluted strip is the split unit, which can be divided into required length and width according to needs. Of course, the strip aluminum processing equipment is universal, but also for copper aluminum coil processing, the products processed are called copper aluminum strips.

Original source: https://www.aluminumstrip24.com/news/processing-technology-of-aluminum-strip-edging.html

Tags: thin aluminium strip,  

Previous： 1060 aluminum strip

Next： aluminium strip ceiling